top of page
GM_CAMERA AROUND
`Camera Around` is a tool that connected to the Camera`s Axis input gives a turntable movement.
![02_cam_ar_node_2.jpg](https://static.wixstatic.com/media/1e0ac4_8b13fac4b9f64b74bd5376d30d851c41~mv2.jpg/v1/fill/w_309,h_164,al_c,q_80,usm_0.66_1.00_0.01,enc_avif,quality_auto/02_cam_ar_node_2.jpg)
![03_cam_ar_ui_2.jpg](https://static.wixstatic.com/media/1e0ac4_e4500a59577245248fbdfba6913604a9~mv2.jpg/v1/fill/w_590,h_528,al_c,q_80,enc_avif,quality_auto/03_cam_ar_ui_2.jpg)
CENTER
Allows you to adjust the position of the center.
​
DISTANCE
Allows you to change the distance from the center.
​
HEIGHT
Allows you to change the height of the camera on the Y-axis.
​
SPEED
Allows you to change the velocity of the movement.
​
TILT
Allows you to tilt the camera.
​
OFFSET
Allows you to offset the camera.
​
ANGLE
Allows you to change the angle of the camera when the 'Disable Look' is on.
​
LOOK
Allows you to adjust the direction of the camera.
​
DISABLE LOOK
Allows you to turn off the values defined in LOOK as the point where the camera is facing
and to change with ANGLE.
This is a quick setup I used for the demonstration.
![04_cam_ar_setup_2.jpg](https://static.wixstatic.com/media/1e0ac4_41cc1bccdfe24d48860348ef588f6c24~mv2.jpg/v1/fill/w_527,h_403,al_c,q_80,usm_0.66_1.00_0.01,enc_avif,quality_auto/04_cam_ar_setup_2.jpg)
bottom of page